1

• High and low speed can be freely converted

• Parts in contact with food are stainless steel, including screws

2

• Food grade imported PU conveyor belt
  

• 3 sets of motors with frequency conversion control; power: 2.25KW

• The conveyor is equipped with 2 powder hoppers, made of stainless steel.

• Attached is a vibrating dusting machine.

• A set of cross-cutting knives, one set consists of 2 cutting knives.

• This machine comes with 2 stainless steel receiving trays with a thickness of 1.5mm.

• This machine comes with a stainless steel lower hopper with a thickness of 1.5mm

• The pressure wheel adopts a precision deceleration adjustment mechanism

• The frame is made of angle steel as the main body.

• Outer body and transition piece supports are stainless steel

• Power: 0.75KW frequency conversion speed regulation.

• Rolling barrel: ￠600*3000 stainless steel.

• The rubber wheels are: 60# rubber on 5 gears, ￠200.

• The frame is made of stainless steel square steel as the main body.

• 4 heavy-duty feet.

• 0.75KW frequency conversion speed regulation.

• The PU tape is 3MM thick.

• Comes with 50-meter-high circular baffles and 30-meter-high straight baffles.

• The frame is 100*40 stainless steel square steel

• There are 5 supporting rollers under the conveyor belt, and the supporting plates are stainless steel plates.

• Comes with 1 filter.

• Power: 0.75KW three-phase motor with frequency conversion control

• 7 sets of upper and lower templates are made of bakelite boards imported from Japan

• Stainless steel unloading device.

• Use organic glass to put the hopper.

• Imported PVC bristle brush, not easy to shed hair.

• The shelves are made of 10MM plates.

• Stainless steel arrangement frame.

• Power: 1.5KW three-phase motor with frequency conversion control

• Bearings: Large wheel bearings are imported

• The driven wheel is ￠800*700, made of 12MM iron plate.

• It adopts spring automatic adjustment steel belt method and manual adjustment (manual).

• Tension spring￠18 wire diameter, 500 long.

• The furnace head and tail platform is a stainless steel platform.

• All supporting wheels are made of seamless tubes and hard chrome plated.

• The supports in the furnace are cast iron bars.

• There are 6 doors at the top and bottom of each section, with reasonable structural layout and convenient maintenance.

• The inner frame is made of 3MM iron plate, and the outer cover is made of stainless steel.

• 100# high density thermal insulation material

• Stainless steel high temperature electric heating tube heating element

• Adopting 4 control temperature zones, the temperature can be adjusted in the range of 0~400℃, and the heating time is about 30 minutes.

• 3 sets of steel belt cooling fans

• Oven band： SANDVIK
  

• Power: 2 0.45KW vibration motors

• The whole machine is made of stainless steel.

• The upper and lower layers of screen mesh can filter large, qualified and small three layers.